Thursday, May 1, 2014

Melitta MEX1B Espresso/Cappuccino Machine ( MEX-1B )

Melitta MEX1B Espresso/Cappuccino MachineIf you're a coffee snob, then this cappuccino maker may be too "pedestrian" for you. However, this little gizmo pays for itself, and here's why:

My wife got herself hooked on cappuccinos from Starbucks, at 5 bucks a pop. Looking at the cost of this machine, including coffee and syrups, that equates to about 10 to 15 cups of coffee from the coffee shop. We've already made over twice that many cappuccinos, and it hasn't shown any signs of wearing out yet.

Oh sure, you can buy more expensive makers, and I looked at them before deciding on this one by Melitta. Most of the others are constructed the same as this one (out of the same type of plastic), they aren't any simpler to use, and according to reviews I've read, aren't any more reliable. So why would you pay between 3 to 5 times more for something that isn't any better?

This little cappuccino maker gets the job done at a fraction of what you'd otherwise pay. I can't think of any better endorsement than that.

its a great product and the price is fabulous! i normally use it twice a day and the controls are really simple. i got my more than my moneys worth!!!

Buy Melitta MEX1B Espresso/Cappuccino Machine ( MEX-1B ) Now

This little machine makes a great cup of cappucino, and isn't difficult to use. This is an excellent buy if you don't intend to make more than 2 cups of cappucino or expresso at a time. The one thing I would change is that you have to buy the stainless steel frothing pitcher separately. I found a little one perfect for this sized machine at Bed Bath and Beyond for about 6 bucks.

Read Best Reviews of Melitta MEX1B Espresso/Cappuccino Machine ( MEX-1B ) Here

I just woke up this morning to use my new Malitta espresso machine and found that I had lost the instructions. I gave it a try anyway and ended up whipping up a couple of awesome cappuccinos first try!! I bought a bag of Starbuck beans & ground them up and used this espresso machine to brew it. The milk frother really works good too. Not too shabby indeed. I recommend this to anyone, especially considering the low cost.

Want Melitta MEX1B Espresso/Cappuccino Machine ( MEX-1B ) Discount?

I live in NYC where Cappuccinos and Lattes run close to $4.00 for a 10 oz. cup (half of it froth). In the interest of saving money I wanted to buy a machine that was small enough to fit in my small kitchen, but sturdy enough to make my favorite coffee drinks on a daily basis and quick and easy to use. This machine features it all. After 10 cups I recouped the cost of my machine and a small Nissan thermos to carry my Lattes in to work.

I bought it 6 months ago and I now can't live without it. And have not encountered any problems whatsoever. My brother in law has had the same machine at the hospital where he works for a year now, providing espresso to the ER staff 24/7. They're only problems with the machine has been caused by staff (one person broke the glass carafe, another clogged the frother by not cleaning it).

I've read the other reviews and some of them complain about things such as the carafe or the frother. It's all common sense use problems. The carafe is made of thin glass so you must be careful with handling and the tempeture of the water you wash it in. This means you don't wash the carafe or put it in the sink if the carafe is hot because the glass will crack. As for the frother, it's got to be cleaned every single time and has to be declogged once a week by placing the frother in a tall tumbler with hot water for a few minutes, making sure that the tip is submerged under the water. That will loosen any dried milk within the mechanism. I then pour water in the reservoir and turn the machine on. After making espresso for myself, I allow some of the steam to come out of the frother and into the tumbler with water. You'll see a lite white cloud forming in the water. Remove it after awhile and wait for the machine to cool wipe down the frother. If during the week the frother gets clogged simply use the clean end of a pin to insert it into the frother end and that should do it.

I hope these tips help you enjoy your little machine as much as I have enjoyed mine.

No comments:

Post a Comment