Espresso Pot Gaskets 6-Cup 2 13/16" Wide for Aluminum Pot Set-4

These replacement gaskets are alot thinner than the gaskets that came with my moka pot. I had to use a little less coffee (make sure the coffee is slightly below the edge of the cup). Since the gaskets are thinner I had to screw on the top about a quarter turn more than normal. The frist time I used the gaskets, coffee leaked down the side of the pot and I lost alot of the water from losing steam. After I made the adjustment(mentioned in the beginning Of the review) the gaskets seem to work fine but I plan on buying new gaskets that are closer to the original gaskets

After replacing a worn out gasket with these OEM gaskets, I was losing over half the water in the pot to steam. After I inserted new Bialetti gaskets, my caffetiera was brewing like new again.

The problem seems to be the thickness and hardness of the gaskets. These OEM gaskets are half the thickness of the original Bialetti gaskets; the material of the Bialetti gaskets also seem slightly softer, so that with the Bialetti, the top and bottom can be screwed deeper into the gasket, creating the tight seal you need for the caffetiera to work properly.

I'm all for saving a few bucks on OEM products, but, unfortunately, these gaskets left me decaffeinated.

Buy Espresso Pot Gaskets 6-Cup 2 13/16" Wide for Aluminum Pot Set-4 Now

Ordered my expresso gaskets from the Wire Wisk. Excellent packing, shipping, and quality product.

Read Best Reviews of Espresso Pot Gaskets 6-Cup 2 13/16" Wide for Aluminum Pot Set-4 Here

I love using moka pots to make espresso, the only draw back is finding gaskets when they wear out. This was a good replacement and did the trick, only had to do one wet run to settle the new gasket to produce a good cup of espresso

Want Espresso Pot Gaskets 6-Cup 2 13/16" Wide for Aluminum Pot Set-4 Discount?