Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, Black

Ok, in my family, I am the only one who drinks coffee. My wife does not. This coffee maker is perfect for myself. It allows me two full 14oz mugs of coffee without wasting an entire pot on just myself.

Most 10-12 cup coffee makers don't do a good job of making smaller amounts of coffee for those of us that may have a single coffee drinker family. The coffee is either lukewarm or not strong enough when trying to make a smaller batch. My wife doesn't like coffee so I am stuck either getting an expensive single K-cup style coffee maker, pod maker or a 4-cup drip brewer. However, thanks to the Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, I can end my search for the perfect solution.

The Brew Station makes an excellent, piping hot cup of coffee. It is said to be a 6-cup brewer and that may be the case for a regular 5oz mug. But for me, I use a 14oz mug and this brewer makes exactly two full mugs of coffee with none to spare. The coffee maker does an excellent job of keeping the coffee hot until needed, without continuously cooking the coffee or burning it. The programming is easy to use, and the overall design is simple enough once you get used to filling the water reservoir. I immediately ran three brewing cycles of just water once I opened the box and then made my first batch. There was no plastic taste or any other chemical taste to my coffee.

Other reviews have stated their Brew Station leaked, but mine does not. There is a little plastic arm that swings out over the coffee ground basket which dispenses the water. I could see that if this arm was not swung out over the basket, it might leak out the back. Also, the actual dispensing mechanism might be another place for leakage if there are coffee grounds or some object stuck between the valve and gasket so be sure to make sure this area has no coffee grounds in it prior to using. Again, I have not had this problem and don't anticipate that I will as I am really careful to not get coffee grounds in the coffee reservoir and always make sure the arm is over the brewing basket.

Others have mentioned that 8-12 cup filters don't fit this maker. The manual does not state which size filter to use either. I have found that 4-cup filters are a perfect fit for this maker and most likely what Hamilton Beach intended. Walmart sells 200 of these filters for around one dollar. If they aren't on the coffee aisle at Walmart, then check where the coffee makers themselves are sold as Walmart tends to sell things in multiple locations inside a store.

Overall, I am very pleased with this maker especially considering the price.

I bought this coffee maker because I got tired of making single cups in my Senseo. This is a PERFECT size for me...3 full coffee mugs the size I use. LOVE the fact I can use a "program" brew feature.

Maybe I was one of the "lucky" ones...but so far no problems. BUT, just want to address some of the prior complaints.

1) "Leaking"....none for me...just at the end when you flip the lid open to clean out the grounds, etc...simple condensation from the lid...just wipe it up.

2) "Not hot"....coffee was PRETTY darn hot....I CAN say, though, as time goes by, the 2nd and 3rd cup were "hot", just not SUPER hot as the first cup...I programmed mine to be ready EXACTLY when I get up....NOT 30 mins earlier,etc. The process of brewing is REALLY fast, so IF you can't get the time that close, just have it ready the nite before....don't use the "auto brew" feature....just turn it on "manually" and it's done basically in 4-5 mins.

3) "Weak"....I used one "coffee scoop"...which is basically a tablespoon/cup...strong enough...depending on taste...maybe use a "columbian" coffee....the REAL stuff....that'll put hair on your chest!! LOL Or, a French Roast....JMO

4) "Filter size"...well, I used what I had on hand...the larger sized ones. I made sure the "water arm" was placed properly to dispense the hot water into the middle of the coffee area...no problems. BUT....I can say....using the "taller" filters (for the 12 cup makers) is DEFINITELY a far better practice...I noticed the grounds traveled "up" the filter after I opened the lid when done brewing....using a "shorter" filter (even though "look wise" they are a better "fit") it would DEFINITELY cause the coffee to overflow out the filter. Just make sure when you close the lid with the "taller" filters a) the water "arm" is centered over the grounds in the filter b) when you close the lid, be sure the "excess" filter material is "fitted" around the inside of the filter basket...it WILL obviously "crinkle" on the top when you close the lid since it's taller.

Seems like a lot of work...but, just common sense stuff...for the money, and compact size, you can't go wrong !!

********************

January 31, 2011

Have NEVER done this...but when I bought this, there were quite a few "1 star" posts. I ended up thinking "I must be one of the lucky people who always get things that work".

AND...yessss, I must have too much time on my hands to come back and update my original post....LOL

1) No offense to anyone....BUT...I didn't bother to read the "directions"....coffee makers are kinda "self explanatory"....or simple enough to figure out...NOT rocket science, IMO. AND...there's "pictures" on the lid with step by step directions if you forget what to do.....

2) I've been using 1/3 cup coffee Folgers STILL the filters that fit my 12 cup maker...STILL just "fold" the excess paper over the edge of the filter basket.....STILL MAKE SURE THE WATER ARM IS MOVED ALL THE WAY OVER THE FILTER BASKET as far as it will go!!!!! Add xtra coffee if it's "too weak" for you!!

****Yes...the lid stays sligltly "open" does NOT go all the way down. One thing wrong...but I said "deal with it".

Coffee is HOT!! Unless you're adding enough milk/half-n-half to make something like a "latte"...then, it WILL be cool. I get THREE 10 oz. mugs of coffee out of this machine....YES, I went and measured!! LOL

3) Fill ONLY up to line inside the well for the water....they put them there for a REASON!!! AND...make sure the water goes INTO the well...DO NOT pour it all over the inside....there IS an "opening" for the dispenser device....which can be seen....and water WILL leak out if you pour it all over the place.

4) Be sure the coffee "well" is put TOTALLY back into the maker...NOT tipped...FLAT with the bottom of the space where it goes.

5) AGAIN...when you flip the lid "up" it WILL have water droplets....the water WILL leak out the back as it flows off the lid....it's called "condensation"....not much to do but to WIPE IT UP!!!

6) Coffee maker IS light weight...coffee maker WILL move as you push the dispenser button to get coffee into your cup ....NOPE, it's NOT a "Krups" or "Cuisinart"...it doesn't imply it is.

Now I KNOW I have too much time on my hands this morning...but, after going thru all this, I'm NOT gonna delete my post now....LOL

Buy Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, Black Now

After reading the negative reviews, I was a little leery of buying this coffee maker, but my daughter bought it for me, and I'm thrilled. I have found that if I'm careful pouring the water in and if I pack the 4-cup filter in the basket before adding the coffee, I have no problem with leaks. The little arm that sprinkles the water over the grounds moves automatically in place when you close the cover, but I just position it myself to be sure. The programming function has worked great so far. The best part is that I no longer have to put the coffee in the microwave after pouring it-it's nice and hot. I think the dispenser is cool, and I love the fact that there's no glass coffee pot to play around with. I feel it's very easy to clean-I just let the pot cool and then soak it for a few minutes and wipe it out. There's hardly any water left in the reservoir after brewing which is great

A word of caution-the components are made of cheap plastic so you do need to be a little careful putting them in place. Don't let the cover slam because it won't close tightly and I think I may have displaced mine a little but it still works fine. It's a little noisy-makes a soft perking type noise as long as there's coffee left, so I know when it's almost empty because the noise stops. There were complaints about it not really making 6 cups, but as far as I know, every coffee maker on the market uses the 6 ounce measure as 1 cup, even though there are probably not many people who use that in real life. What does a 6 ounce cup even look like???

I think there may have been some improvements since the earlier reviews-there is a picture guide inside the lid, and a very basic manual. One thing it does say is not to use more that 5 Tablespoons of coffee, probably because if you use much more, it will leak or get grounds in the coffee. I have had no trouble so far with using heaping spoonfuls

Read Best Reviews of Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, Black Here

Made my first cup of coffee this morning in my new 6-cup Brewmaster. I read the reviews of the thing after I bought it (of course) and took note of the many complaints about leaking. It is an idiosyncratic little device. The coffee basket isn't quite deep enough for standard 10-cup filters, so that when you close the top, the mashing action can push the water arm out of the way, which I'm guessing can lead to leaks. Thing is, I see no mention of a water arm--dripper--whatever in the instructions or in the diagram, and the part is movable. If it moves, you should mention it in the manual, especially if said 'it' needs to be in a certain position for unit to work properly. Because you have to move the water arm out of the way to take the basket and reservoir in and out, and if you don't move it back in place after you put the reservoir and basket back in the machine, the water will not drip over the coffee but elsewhere. Given that the arm can also move around after you close the lid, it really needs to be mentioned in the directions. Too bad it doesn't lock in place. It moves too easily.

The brand of coffee you use will help determine whether you can 1) fill the thing to capacity, and 2) get a decent cup of coffee. Instructions say to add 3/4 tbsp per 6 oz cup instead of the usual 1 tbsp (or 2 tbsp in the case of Starbucks coffee, which I tried first). Make note of your preferred coffee if you're thinking of buying this. My first cup of Starbucks was definitely weak. I then made a cup using Eight O'Clock French Roast, and that tasted better but was still a little weak for me. My rule of thumb will be 'more coffee, less water.'

During clean-up, I noticed dried coffee on the reservoir's metal warming plate. Not sure how much flavor that would lend to any coffee left in the reservoir, but it's one more reason to stick to one cup at a time.

I agree with the other reviewers who say that the coffee is not piping hot. Not much of a drawback for me, but if you're one of those people who adds a lot of milk/cream to your coffee, you will wind up with a lukewarm brew.

Over all, the unit is a decent fill-in for someone who just wants a cup at a time--many larger coffeemakers have trouble when brewing smaller amounts. I like it because it's fast, small, doesn't take up much room on my kitchen counter, and there's no carafe to worry about. As for the coffee-water proportions, every coffeemaker is different and you always need to work that out anyway.

One star for the manual, because it's incomplete. If I hadn't read the other reviews here, I wouldn't have been on the lookout for leaks and wouldn't have caught the fact that the water arm had moved after I closed the lid.

UPDATE (8/29/2010): Still using my Brew Station. It still makes pretty good coffee. If I fill to the 4-cup line, I add 6-7 level tablespoons of autodrip-grind coffee. Yes, it's more coffee than the directions say to use, but that's the amount needed to make a strong brew.

The unit has leaked since the beginning, but these aren't signs of breakage or damage. It just isn't a tightly closed system, so there are plenty of places for water to condense and drip. The underside of the lid especially collects water, which can drip down the back of the unit when you open it to remove the used grounds. Leaking also increases as deposits build up--it really is important to clean the unit regularly with a good descaler like CLR.

Still give it 3 stars, maybe 3 1/2 for lasting as long as it has. If it breaks down at some point, I would consider getting another.

Want Hamilton Beach 48274 Brew Station 6-Cup Coffeemaker, Black Discount?

I purchased this coffee maker last week, to replace a Cuisinart that always made luke warm coffee. I was disappointed to see that the filter size was not stipulated on the box, since I wanted to buy some filters with the machine, but Target had some 4-6 cup filters and I tried one in their display pot and it was a perfect fit.

After getting it home, I realized that the really weak link in this product is the instruction manual. It is written in several languages, but looks like it is equally bad no matter what language you are reading it in. Well it is just a coffee maker, so it isn't rocket science. I noticed that if you used the incorrect size filter, that you would probably run into some of the problems that are mentioned on the reviews on this site, such as leaking and coffee grounds in the coffee and machine. The reason is, if the filter is too big, the arm that automatically swings over the brewing area, will hit the filter as you close the lid, causing the filter to fold up and allowing the coffee grounds to spill over the top of the filter holder and get into the brewing-holding compartment, and eventually into the valve that allows the coffee to enter your cup when you push the button to fill your cup up. The solution is very simple, use the correct size filter....You can also swing that filling arm over manually prior to closing the lid, to insure that the filter doesn't get hit by the arm.

I brewed a few pots and the coffee was hot and tasted good. I measured the serving temperature of the coffee an it was 165-170 degree F, which is the proper serving temp for coffee. The coffee is the same temperature after 2 hours, and doesn't have that burnt taste that most coffee makers get due to the warming plate burning the coffee.

This pot is great for a single person or a couple that drinks one or two cups of coffee at a time. Only 4 stars due to the horrible owners manual.

Save 29% Off

Primula Replacement Silicone Gaskets for 9 cup Size Aluminum Pots, Set of 3

Very Good product. Fits great. Different material then original, but much better material. ( I need to add seven more words to this review.)

The product is adequate. The silicone rings apppear to be less sturdy than the rings which came with the unit. Furthermore I could use smaller rings but have been unable to find these.

Buy Primula Replacement Silicone Gaskets for 9 cup Size Aluminum Pots, Set of 3 Now

I bought these for my Bialetti 9-cup stovetop aluminum pot, but wasn't sure if they would work. They work great. Definitely get the silicon instead of the old rubber gaskets. There is no break-in time, unlike the rubber ones that sometimes took weeks, and they clean up a lot easier.

Read Best Reviews of Primula Replacement Silicone Gaskets for 9 cup Size Aluminum Pots, Set of 3 Here

I bought these gaskets for my 9-cup Primula expresso maker. They fit perfectly and work exactly as expected. I highly recommend them.

Want Primula Replacement Silicone Gaskets for 9 cup Size Aluminum Pots, Set of 3 Discount?

Continental Electric 4-Cup Coffee Maker, White

This coffee maker does make coffee, so it lives up to its name. An annoyance is that the placement of the lid causes all the condensation to drip on the counter rather than back into the reservoir. My bigger concern is that after 5 months of twice-daily use, the machine still has a strong plastic smell, and the taste of plastic comes through in some coffees. Yet I continue to use the coffee maker, so it must not be too bad, but next time I'll spring for something better.

I enjoy my coffee from this cute 4-cup coffee maker. It smells and tastes just like good coffee you bought from a local coffee shop. I wish it has a longer extension cord though.

Buy Continental Electric 4-Cup Coffee Maker, White Now

This is the perfect little coffee maker. Great purchase. May be a better deal to buy a larger pot considering the price difference. Works great for my needs!

Read Best Reviews of Continental Electric 4-Cup Coffee Maker, White Here

Given as a gift to a neighbor as a housewarming gift... The recipient said she is very happy with this product.

Want Continental Electric 4-Cup Coffee Maker, White Discount?

Bought this for my husband for Christmas as he is a coffee drinker and I am not. I wanted to buy him a larger coffee pot, but he only wanted a four-cup maker and according to him it works really good, makes coffee fast and easy to operate. For the price you can't beat it.

Keurig B 3000 SE Coffee Commercial Single Cup Office Brewing System

My workplace received one of these a week or two ago and after some use, I have to say that I mostly like this for the below reasons:

What I like: I like that this is hooked up to the building's water supply. There's no filling of any reservoirs at any point in time, although occasionally the unit will need to drain or to heat its inner reservoir. This doesn't take very long and the wait time is not that much more than the smaller Keurigs that have the reservoir that you have to fill manually. It's a bit larger so it takes longer, but that's about it. It's a fast machine and despite some initial confusion over what people needed to push to get the desired result (we had no instructions left for us), it was pretty easy to learn what we needed when. There is an option to just get hot water, which is nice. You could technically get that with the other Keurigs, but it's still nice.

What I'm ambivalent about: Rather than you having to remove the k-cup cartridge after use, the unit dumps it into a bucket with several other k-cups. You have to empty it out occasionally and the bucket will sometimes fill up with water, which I think is part of the draining process. The lazy part of me likes this, as I tend to leave k-cups in the machine sometimes, but the more fastidious part of me hates that there are several used k-cups in the machine that are sometimes sitting in an inch of water. It's not that the machine isn't emptied regularly, it's just the thought of it.

There really isn't anything I dislike about it at this point in time. The only thing I can say about it is that if something breaks, you absolutely have to take this in for repair. It's too expensive to be trusted to anyone other than someone who is experienced with this sort of machine. If you have someone at work who knows how to fix them, then repairs wouldn't be as bad as getting someone to fix the internal bits and bobs of your office copier or printer, but this isn't as easy to fix or replace as the more inexpensive units.

Despite it being bigger and looking more impressive than the smaller units, this is generally not any different than your basic machine. It looks like it could put up with more abuse than its kin and it's good for larger amounts of users, but if you have an office that has under 10 workers that would only drink about 10-15 cups a day, you could probably get away with one of the smaller machines. If you know that they'll drink more than that a day or that you have more workers, this is probably the way to go.

My company purchased several of these machines for every floor in the building and they were really convenient to make coffee. We typically had a drip coffee make that filled up a huge 2.2L Airpot, but everyone who made the coffee had their own definition of a perfect cup. Therefore, coffee came awful depending on the person that made it. The keurig machine solved many of those issues since people needed to make their own cup and were allowed to select the strength.

One drawback is the holder for the k-cups is difficult to clean. From the constant usage, the holder and piercing mechanism builds up coffee sludge. I have not found a way to remove the holder for cleaning. Therefore, I usually pour a hot cup of water. Well dry coffee is difficult to clean without scrubbing, so the hot water doesn't get the job completely done.

Another thing that is a minor annoyance is again in regards to the holder. When you open the unit to place another k-cup, the k-cup holder swings the used k-cups into a little trash bin. Sometimes drops of coffee is left on the holder. When the holder swings back after dispensing the used k-cup, it splashes coffee right at you. I have been splashed several times in the face and eye from this. Therefore, I typically open the unit slowly or cover the opening with a towel to avoid the splash.

Buy Keurig B 3000 SE Coffee Commercial Single Cup Office Brewing System Now

Instructions included need to be a bit more explanitory when it somes to the tubbing leading from the filter and from the coffee pot. Nothing is mentioned about the adapter needed to adjust the the two lines together.

Read Best Reviews of Keurig B 3000 SE Coffee Commercial Single Cup Office Brewing System Here