I've had this machine now 4 months. I've had many machines before it, including the ever popular DeLonghi. This is an amazing machine, but there are a few things to know.
1. All espresso machines, and even some coffee machines, need to be primed. If there is water in the tank, yet it's not pumping but making noise, chances are you just need to prime it. Turn the steam knob just like in the manual, and if it fails, try again. You only have to do this when you first get the machine, or if you some how let it run dry.
2. The specs list this as not coming with a tamper, that's only partially correct. It comes with a plastic scoop / tamper combo thang. Before you get too annoyed with it, I recommend ordering "RSVP Terry's Tamper" (probably advertised on the same page). It's less than 7 bucks, and the small side fits this machines portafilter perfectly.
3. Some reviewers have knocked this machine because the "Filter keeps getting clogged". Here's a news flash: All espresso filters will get clogged if your grinder leaves too many fines. You can get pre-ground espresso (I recommend LaVazza InBlu, or Illy), or you can get yourself a good grinder (doesn't need to be great, as long as it grinds *evenly*). If you accidentally grind too finely, this machine comes with pins to un-clog the filter. You can save a bit of time by just rubbing your thumb over the filter aggressively while running watter over it.
4. Noise. Without a doubt, this is the noisiest espresso machine I've ever owned. That said, I just purchased a Kurieg for my wife, and it is noisier and had even more trouble with it's initial priming. To the Kurieg's credit, there is no grind to mess with, and the clean up is Zero. :)
Now for the stuff that Hasn't been mentioned, but if I where Cuisinart, I'd be shouting this from the roof tops...
1. This machine has the most rock solid temperature across shots I've ever seen. Nothing else comes close.
2. This machine has integrated pressure relief. It's not perfect, which is probably why they didn't mention it, but even Gaggia's solenoid freaks out from time to time too. Most every other manufacture with this feature charge double this machines cost. It's a big deal.
3. I've been inside DeLonghis, Gaggias, and others, this thing is pretty well built. It also looks pretty nice on the outside, and has a water res that is easy to use, large enough, and above all else, leak free.
4. The steam wand works well. It actually works better than my Gaggia's (which was 4 *times* as much money), but it is Different, and takes some initial practice.
5. This machine has an auto power down. That's a Very Nice feature that is often overlooked on less expensive machines, and it's very handy too.
6. The dosing on this thing actually works. I've had a couple other machines that claimed dosing, yet they all seemed pretty random. This one actually works and it works reliably. Before you think this is a feature you can live without, consider this: With non-dosing machines, you need to use a shot glass or some other way of eye-balling when to stop, then put into final glass for mixing. But, with dosing, you can punch up a double shot right into the final cup, and it gets it right. Every Time. How cool is That??? Very Cool!
The only things I wish they did different:
1. I wish the machine was quieter.
2. I wish they had a non-pressurized portafilter basket option.
But, when you compare that to the plus side, it's a no brainer: Buy This Machine!
Not having to temperature surf, not having gooey cleanup, having a cup warmer that actually works, AUTO POWER DOWN, dosing, etc., all for the price of a used Gaggia? Just click "Add to Cart" already!
I read that another reviewer had trouble with her machine. Hopefully it was the exception and not the rule. It comes with a 3-year warranty, so I figure that I have reasonable protection should anything break.
This is my first espresso machine and I did a lot of shopping and read a ton of reviews before deciding to buy. I was nervous about buying it because there were zero reviews at the time. However, I loved the look, liked the feature set, and believed in the Cuisinart brand. I have had the machine for a week and have used it at least once each day. So far I am extremely pleased.
I had considered the DeLonghi EC155, which gets good ratings and is reasonably priced. However, it requires the operator to guess or measure the volume of espresso. I am terrible at guessing the volumes of liquids, so I liked that this machine has buttons that make a pre-set (or programmable) volume of coffee. It turns out that this is a great feature and really frees me to multi-task. In the mornings, I hit the power button, and by the time I fill the portafilter the machine is ready to brew. I hit the brew button and mix up my meal replacement shake. After the coffee is finished, I hit the steam button and pour the milk for frothing. It takes less than 30 seconds to froth and steam the milk, so I am pleased with its power. I have never run out of steam and was able to make a nice foam with very little practice. I can make my breakfast shake and a cappuccino or latte in under 10 minutes with the above process. Not bad for an amateur.
Overall I am very pleased with the machine and am having a great time with it. I would recommend it based on my experience thus far.
Buy Cuisinart EM-200 Programmable 15-Bar Espresso Maker, Stainless Steel Now
This unit is nicely put together, with its stainless steel finish. It definitely has a quality feel to it. I had no problem with turning the steam knob, as others have mentioned.
The machine makes excellent espresso, both in semi-automatic and manual modes. Good crema, excellent taste.
Where this machine fall short, though, is in steam volume. It takes a long time to froth the milk, and getting it right is very hit or miss. At first I thought there was more to the art of frothing than I'd assumed, and I kept working on my technique. The best approach, I found, was to include a couple of ice cubes in the milk, to keep the temperature down as the froth built up. Results were barely satisfactory.
I have since discovered that a stronger steam flow is the key to frothing effectively. I'm now using a fully automatic DeLonghi machine that makes excellent espresso and has a far more powerful flow of steam than this Cuisinart (at least the one I had).
If espresso is your thing and you don't mind the manual grinding, tamping, and brewing, this is a great machine. If frothing milk is part of your favorite drink, I'd suggest looking elsewhere.
Read Best Reviews of Cuisinart EM-200 Programmable 15-Bar Espresso Maker, Stainless Steel Here
This machine is amazing! Makes great expresso! I bought this machine to replace a Breville that I was not completely happy with, as it made weak espresso and I needed to turn a knob to brew the correct amount. NOT WITH THIS MACHINE! Push a button and walk away, come back to a single or double shot. The water tank is easy to refill (I use a clean syrup bottle to refill it, instead of removing it). The frothing knob is hard to turn at first, but upon the 3rd or 4th use, it is fine. I do not find the frothing wand to be too low or drippy, after all it swivels over the drip tray, duh!!! Looks great on the counter, large cup warming surface, truly stainless, not painted plastic, like some of the Breville is. A++++++
Want Cuisinart EM-200 Programmable 15-Bar Espresso Maker, Stainless Steel Discount?
I did a lot of research and read a ton of reviews of different espresso machines before buying the Cuisinart EM-200. This machine works excellently, but you have to make sure that you read the instructions (or watch the included instructional DVD). Here's a couple things that will help you make sure that you brew great espresso with this machine, which is especially easy to do once you get the knack of it!:
1. Make sure that you use good quality water so that you're espresso tastes as great as possible. If you're water is chlorinated or has a lot of dissolved minerals or metals, then you should probably run it through a Brita, Pur, Zero, or some other filter.
2. Make sure that the water tank is seated well so it activates the spring valve on the tank otherwise you will not get any water into the machine. Also, if the tank is not seated properly, it could potentially leak. However, I have never had any problems with mine.
3. Think carefully about what coffee you are using. Lots of people seem to use "espresso roast" coffee, but then complain about the lack of crema production. Crema production is partly a function of the roast of the coffee. Many European espresso shops use medium roasts (sometimes called a "city roast"), which tend to yield a better crema. It's your coffee, of course, but you might want to keep this in mind before purchasing espresso, French, or Italian roasts for your espresso maker.
4. Make sure that your espresso grind is very fine and even, if you're not using espresso pods (I rarely use them). It's tough to get a good, consistently fine grind with a blade grinder so you'll probably want to use a bur grinder. There are a bunch of good ones out there for around $25-$50.
5. You'll want to use 13 grams of ground espresso for a 1.5 fluid ounce (the "single serving" standard brew on the EM-200), 17 grams if you're going to brew a double shot (2 fluid ounces ), and 25.5 grams if you're going to brew 3 fluid ounces (the "double serving" standard brew on the EM-200). You can use the combo tamper/measurer that comes with the machine, but because espresso can compress *very* easily, it's better to weigh it for the sake of consistency.
6. Make sure that you tamp your coffee down well. The combo tamper/measurer is a little hard to give ground espresso the right pressure, so I use a stainless steel tamper to tamp to 40 lbs. of pressure. (The instructions with the EM-200 are not very specific on the pressure, but 40 lbs. of pressure yields good results for me with this machine.) I place the portafilter on a kitchen towel and then tamp the coffee so as not to damage the portafilter.
7. If the EM-200 is starting cold, it can take a minute or so to heat up. I usually fire it up before measuring, grinding, and tamping the coffee. This way it is ready to go as soon as possible.
8. Either select the manual, pre-programmed single or double serving, or the programmed serving and brew your espresso! (I know right, finally!) On my machine with properly tamped espresso, the pre-programmed 1.5 fl. oz. and 3.0 fl. oz. buttons were spot on and yielded those exact amounts. (I measured them in a graduated beaker.) If your yields or steam production declines over time, it could be due to mineral buildup in your machine. You can run a mineral cleaning product through your machine. They are cheap to get and easy to find on Amazon.com or your local Bed, Bath, and Beyond, for example.
9. If you're frothing milk for your espresso, you'll want to hit the steam button right after your pulling your espresso shot so the machine builds steam as quickly as possible. Once the steam button indicates it is ready, start the steam over the draining grate on the machine (in case any water comes out). After you see good steam coming out, move your milk pitcher into position and heat your milk to around 160°-170° F. You'll probably want to use a frothing thermometer, which are pretty cheap ($5-10) to get.
10. Pour your milk and spoon your frothed milk into your espresso (if you're using it) and you're all set!
Cleaning the machine is easy. I clean the portafilter, steaming wand, and drip tray by hand since it's easy and far less harsh than the dishwasher.
I've read reviews of this machine and think that probably 90% of the complaints about this machine are due to "operator error" and people really not knowing what they are doing, in my opinion. This machine works great when you use it properly! :-)
This machine is definitely worth the money and if you're looking for a semi-automatic machine, then I would recommend this one!
Thanks!
Save 50% Off
DELIVERED TIMELY, ITEM AS DESCRIBED, AND PERFECT FOR MY FURNACE/AIR CLEANER THE ITEM IS TWICE THE SIZE OF THE ORIGINAL ONES WHICH CAN WITH THE INSTALL SO DONT HAVE TO GET ON MY KNEES TO PULL OUT THE SECOND HALF...GREAT. THEY ARE WASHABLE AND MADE OF METAL. THEY MAKE LIFE A LITTLE EASIER FOR ME. MONEY WELL SPENT AND A GREAT PRICE.
If you like expresso or lattes and you are looking for convenience and portability, here's your answer. Simply unscrew the top from the bottom. Fill the bottom to the line with water. Place the metal filter in the bottom and fill with your favorite ground coffee. Now, screw the top half of the pot back on place the pot on the electric heating plate and wait 5-6 minutes to pour excellent coffee. I like to warm lowfat milk in the microwave while I wait. The coffee beeps when it's ready, and you simply pour. Sweeten to taste. A full pot makes one venti-sized latte or six espresso sized portions. Barristas unite!
This machine is not worth the money. I bought it for home and regretted it.
Much easier to deal with making coffee , and not have to worry about the handle burning ever! Not to mention that it matches my mortal and pestal!